Hanging The Base Unit On A Wall - Sony ID Telephone SPP-ID200 Mode D'emploi

/ Placing the phone units

Hanging the base unit on a wall

1
!
To mount the wall bracket
directly on the wall, use the
supplied screws.
To the telephone outlet
AC outlet
!
If your telephone outlet is not
modular, contact your telephone
service company for assistance.
Modular
10
Setting up
Telephone line
cord (supplied) Wall plate
AC power adaptor cord
1
Press the AC power adaptor cord and the short
telephone line cord into the wall bracket.
2
Hook the wall bracket to the wall plate and plug
the telephone line cord into the telephone
outlet.
3
Insert the tabs on the top of the wall bracket
into the base unit and press the phone so that
the lower tabs on the wall bracket go into the
base unit.
Then extend the antenna fully.
4
Connect the AC power adaptor and the
telephone line cord.
For details, see the "Connecting the base unit" section
(page 9).
2 3
SPP-ID200(EF) 3-810-886-21(1)