Operating Procedures; General Advice; Functions - Sirius SU906 Notice D'utilisation Et D'entretien

O PE R AT I N G PR O C E DU RES
Read all the instructions before operating
the appliance. Save these instructions for
future reference.

General Advice.

Ensure that the grease filters are in place.
Without these components, operating blo-
wers could catch on to hair, fingers and lo-
ose clothing. Keep fan, filters and surfaces
free from grease and fat. Always turn the
hood fan ON when cooking. NEVER leave
cooking unattended.
NEVER dispose cigarette ashes, ignitable
substances or any foreign objects into blo-
wers.
Cooking that generates flame is not recom-
mended as this hood is equipped with a
thermal overload that will shut down the mo-
tor if it senses excessive heat. When frying,
oil in the pan can easily
te. Heat oil slowly in an appropriately sized
pot (covering the entire burner) to reduce
the risk of boiling over and burning.
In the event of a range top grease fire, ob-
serve the following:
Switch OFF the range hood. Turn off the
cook top then smother flames with a close
fitting lid, cookie sheet or other metal tray. If
the flames do not go out immediately
EVACUATE AND CALL THE FIRE DE-
PARTMENT.
Never pick up a flaming pan - you may be
burned. DO NOT USE
wet dishcloths or towels, as a violent steam
explosion may occur.
overheat and igni-
WATER including
15
FUNCTION
Mod. SU (Fig. 29).
A: Light ON/OFF button
B: Blower Speed 1 (low) or OFF
C: Blower Speed 2 (medium)
D: Blower Speed 3 (high)
E: Blower Speed 4 (intensive)
F: 10 Minute Timer
fig. 29
Mod. SUTC – Glass (Fig. 30)
A: Light switch On/Off
B: Reduce speed / OFF motor
C: Luminous telltale
D: ON motor/incrase speed
E: 10 - minute timer
The touch control key allows the function de-
sired by touching the relative key.
If the electrical power supply to the product
SUTC is cut, 15 seconds are needed for sel-
fdiagnostics after the functions are restored.
Meanwhile, its operation may be incorrect.
The products are endowed with an electronic
device which allows the automatic switching
off after 4 hours from the last operation.
fig. 30