Setting The Clock; Cassette Player Operation; Listening To Tape Playback; Ejecting The Cassette - Sony XR-3501MK2 E Mode D'emploi

Setting the Clock

The clock has a 24-hour digital indication.
For example, setting it to 10:08
1
Display the time.
DSPL
(Press the button during unit
operation.)
2
DSPL
Press the button for more than two
seconds.
The hour digit(s) blinks.
Set the hour digits.
– +
SEL
(to go back) (to go forward)
3
Press the button momentarily.
SEL
The minute digits blink.
Set the minute digits.
– +
SEL
(to go back) (to go forward)
4
DSPL
Press the button momentarily.
The clock activates.
Note
The clock cannot be set unless the power is turned on. Set
the clock after you turn on the radio, or during tape
playback.
Actual total number
Cassette Player
Operation

Listening to Tape Playback

After inserting the cassette, playback
will start automatically.
To change the tape direction,
press both the 0 and the ) buttons at the
same time.
Indication of Tape Transport Direction
The side facing up is being played.
The side facing down is being played.
Tape playback automatically changes
direction at the end of the tape.
Note
Before turning off the unit, eject the tape to avoid tape
damage.

Ejecting the Cassette

Press the button to stop playback and eject
the cassette.
E
Sony XR-3501MK2 ( ,F,G,H,I) 3-810-725-11 (1)
EN
5