Additional Functions (Menu); Navigate Within The Menu - Seca 285 Mode D'emploi Et Garantie

7.2 Additional functions (menu)

Navigate within the
Additional functions are available in the device's menu.
This allows you to configure the device to suit your own
needs perfectly.
Beep
CAL
rF*
Reset
LCD
Unit
End
* The menu item "rF" is described in section "Operate
measuring station in a wireless group (menu)" on
page 112.
1. Press the Start key
menu
"----" appears in the display.
2. Hold down the Enter key (send/print) and the
arrow key (hold/zero) simultaneously.
The last menu item selected is shown in the display
(here: "bEEP").
3. Keep pressing the arrow key (hold/zero) until the
required menu item appears in the display (here:
"LCd" display settings).
4. Confirm your selection with the Enter key (send/
print).
The current setting for the menu item or a submenu
is displayed (here: duration of display backlighting
"dur").
• on
• off
No
Yes Auto
....
• Short
Duration
• Long
• 50 %
• 100%
Brightness
• off
• cm
• ft:in
of the head slide.
Operate head slide • 107
English