Device Overview - Cleanmaxx LD-622 Mode D'emploi

EN

Device Overview

10
9
8
7
6
1 Handle on the suction hose
2 Telescopic tube
3 Dust container lid with handle
4 Release button
of the dust container
5 Floor nozzle
6 Dust container
7 Cyclone insert with 2 motor fi lters
(sits in the dust container)
8 Connection piece
Nozzles
The fl oor nozzle is suitable for both carpets and hard fl oors.
The foot switch allows you to change between carpet and hard
fl oor. For hard fl oors, a brush is extended on the underside of the
nozzle.
The combi nozzle is a combination of a crevice nozzle and brush
nozzle. Flip over the end piece in the direction of the arrow to turn
the crevice nozzle into a brush nozzle:
• The crevice nozzle is suitable for upholstery and for all nooks
and crannies that cannot be reached with other nozzles.
• The brush nozzle is suitable for all uneven objects, furniture,
lamps, profi les and skirting boards, window ledges, etc.
18
1
2
3
15
4
5
9 Suction hose
10 Exhaust air valve
11 On / Off switch
12 Exhaust air hatch (the HEPA exhaust
air fi lter sits behind it)
13 Holder for hooking in
the fl oor nozzle
14 Mains connecting cable
15 Button for winding up the cable
14 13
11
12