Items Supplied - Cleanmaxx LD-622 Mode D'emploi

WARNING – Danger of Fire!
■ Do not use the device in rooms containing easily ignitable substances or poisonous
and explosive fumes.
■ Do not cover the device during operation in order to prevent it from catching fi re. Do
not insert anything into the openings of the device and make sure that these do not
become clogged.
■ In the event of a fi re: Do not extinguish with water! Smother the fl ames with a fi reproof
blanket or a suitable fi re extinguisher.
NOTICE – Risk of Damage to Material and Property
■ Only connect the device to a socket with safety contacts that is properly installed and
matches the technical data of the device. The socket must also be readily accessible
after connection so that the connection to the mains can quickly be isolated.
■ Only use suitable extension cables whose technical data is the same as that of the
device.
■ Make sure that the mains cable is not squashed, bent or laid over sharp edges and
does not come into contact with hot surfaces. Do not wrap the mains cable around
the device (danger of the cable breaking).
■ The device should only be used if it has been completely and correctly assembled!
The dust container and the fi lters must be inserted and must not be damaged.
If the dirt were to get inside the motor unit, this could damage the motor.
■ Remove the mains plug from the plug socket if a fault occurs during operation or
before a thunderstorm.
■ The device must be switched off when inserting or removing the mains plug. Always
pull the mains plug and never the mains cable to disconnect the device from the
mains power. Never pull or carry the device by the mains cable.
■ Protect the device from heat, naked fl ames, sub-zero temperatures, persistent mois-
ture, wet conditions and impacts.
■ Use only original spare parts from the manufacturer.
■ Do not place or lay any heavy objects on the mains cables.

Items Supplied

• 1 x main device
• 1 x suction hose
• 1 x telescopic tube
• 1 x fl oor nozzle
• 1 x combi nozzle
• 1 x instructions
Check the items supplied for completeness and transport damage. If you fi nd any dam-
age to the components, do not use them (!), but contact our customer service depart-
ment.
17 EN