Filling Coffee Beans Into The Bean Container - Melitta Purista 300 Série Mode D'emploi

Basic operation
Information
ū When switched on and off, the appli-
ance performs automatic rinsing.
ū During rinsing, rinsing water is also
conducted into the drip tray.
Switching on the appliance
1. Place a vessel beneath the outlet.
2. Press the "ON/OFF" button (15).
» The appliance heats up and performs
automatic rinsing.
» The appliance is ready for operation.
Information
If the appliance was only switched off
briefly, there is no automatic rinsing after
switching on.
Switching off the appliance
1. Place a vessel beneath the outlet.
2. Press the "ON/OFF" button (15).
» The appliance performs automatic
rinsing.
» The appliance switches off.
Information
ū The appliance switches off automati-
cally when it is not operated for a long
time. Automatic rinsing is also carried
out in this case.
ū You can set the off time in Service
mode 1 (see section 6.2 Setting Auto
OFF on page 40).
ū If no beverage has been prepared since
switching on or if the water tank is
empty, no rinsing takes place.
4.2 Filling coffee beans into
the bean container
Roasted coffee beans lose their aroma.
Only fill the bean container with as many
coffee beans as you will consume over the
next 3 to 4 days.
36
ATTENTION
The use of unsuitable types of coffee can
lead to clogging of the grinder.
Do not use freeze-dried or caramelised
ƒ
coffee beans.
Do not use any coffee powder or
ƒ
instant products.
Information
When changing the type of beans, remains
of the old type of beans can still be in the
grinder.
Even if the bean container runs empty
and a new type of bean is filled in, there
are still remains of the old type of bean in
the grinder. For this reason, the first two
coffees dispensed can contain remains of
the old type of bean.
The flashing Coffee bean display
requests you to refill coffee beans.
Fig. 5: Opening the lid of the bean con-
tainer
1. Open the lid of the bean container. (3).
2. Fill coffee beans into the bean con-
tainer.
3. Close the lid of the bean container.
The next time a coffee is dispensed, the
display no longer flashes.
If the bean container runs empty during
beverage preparation, output is inter-
rupted and the Coffee bean display flashes.
When you fill the bean container with
coffee beans, the display will initially con-
tinue to flash. After pressing a direct key,
coffee beans fall into the grinder. Coffee is
3