Check Actuators On The Output Module - Aventics DDL Mode D'emploi

98 AVENTICS | DDL | R499050020–BDL–001–AD
Commissioning and Operation
7.3.5

Check actuators on the output module

O
Before commissioning, check the actuator function and the
method of operation using the LED displays on the output
module (see Tab. 27).
O O
O O
O O
O
O
O
Fig. 9: LED displays on the M8 output module (left) and M12 (right)
Table 27: Meaning of the LED display on the output module
LED Color
U Green Load supply U
Q1
Red
Off
U Green Load supply U
Q2
Red
Off
O0 to O7 Off
Yellow Corresponding HIGH level output
O
Meaning
available
Q1
Diagnosis: Overload/short circuit of controlled
output O0, O1, O2, or O3
Load supply U not available
Q1
(e.g. emergency OFF)
available
Q2
Diagnosis: Overload/short circuit of controlled
output O4, O5, O6, or O7
Load supply U not available
Q2
(e.g. emergency OFF)
Corresponding LOW level output