Before Starting Operation - Bresser 7007600000000 Mode D'emploi

15 Outdoor temperature value
17 Selected channel for remote
sensor
19 Symbol when snooze func-
tion is activated
21 Symbol for radio signal
23 Selected transmission chan-
nel

8 Before starting operation

NOTICE
Avoid connectivity disruptions!
To avoid connectivity disruptions between the devices, con-
sider the following points before starting operation.
1.
2.
3.
4.
5.
When changing batteries always change batteries in the
main unit as well as all remote units and replace them in the
correct order, so the remote connection can be re-estab-
lished. If either of the devices is mains-powered, the power
Place base station (receiver) and remote sensor
(sender) together as close as possible.
Set up power supply for the base station and wait until
the indoor temperature is displayed.
Set up power supply for the remote sensor.
Position the base station and the remote sensor within
the effective transmission range.
Ensure that the base station and remote sensor are as-
signed to the same channel.
16 Symbol for temperature
alarm (highest or lowest
value)
18 Outdoor temperature informa-
tion
20 Battery level indicator (Re-
mote sensor)
22 Outdoor temperature value
29 / 76