Main burner Lighting :
Step 1.
Make sure the Lid is open
Step 2.
Push and turn main burner knobs to "IGNITE/HIGH"
position. Pilot torch will light. Hold for 3-4 seconds until
burner is lit.
Step 3.
You may need to try 3 or 4 times to light the burner. After
the burner is lit, adjust the knob as desired.
1.
If the burner will not light after several attempts then the burner can be match lit.
2.
If you have attempted to light the main burners with the igniter, allow 5 minutes for any
accumulated gas to dissipate.
3.
Insert a match into the lighting rod. Ignite the match and insert through the cooking grid to
the burner.
4.
Rotate the control knob to the "Ignite/HIGH" setting. The burner should light immediately.
5.
If the burner does not light within seconds turn the knob to the "OFF" position, wait 5
minutes and try again.
Lighting Instructions
To Match Light Grill
18