Wiring; Vvx With Pulses Output - SIKA Vortex VVX 15 Notice D'utilisation

Electrical connection

5.1 Wiring

The pin assignments are the same for both M12x1 and pin header RAST 2.5, but they may
vary depending on the device configuration.
Pin assignments:
M12x1
 Wire the connecting cable according to your device version and the pin assignments
shown on the type plate.
Supply voltage:

5.1.1 VVX with pulses output

Flow
Push-Pull * 1 :
*1: Not at 5 V.
*2: Do not wire the push-pull switch outputs of multiple VVX devices in parallel.
*3: Recommended pull-up / pull-down resistance R
Temperature (optional):
NTC / Pt 1000
- 32 -
Possible pin assignments:
Pin 1: +U
B
Pin 2: U / R / Alarm
Flow Temp
Pin 3: GND / R
Temp
Pin 4: Puls
Pin 5: U / R / Analogue U/I
Temp Temp
NPN Open Collector:
RAST 2,5
PNP Open Collector:
~5 kΩ.
L
© SIKA • Ba_VVX • 02/2016
VVX