Mma Process - Cebora MIG Manuel D'instruction

G
Job Menu�
JOB
In this section you can save, call up, restore, copy or cancel the working programs.
Saving a "JOB" program.
After finding the
en displays the
The saved string shows the process, the type and the diameter of the wire.
Before saving the working program, you can select a number to save it under by simply turning knob 2 to the selected
number.
The job screen shows the key SAVE and two additional keys COPY and
save any job program and save it again under another number. Use the "del" button to delete any saved job program.
Press key JOB to open a screen with all the saved job programs. Press key RIC and key OK to call up any pro-
gram from the memory and modify it.
with the selected program number is displayed on the main screen; turn knob 2 to recall all the saved
JOB
The key
1
job programs one by one in order to modify them.
H
Presence of accessory, cooling unit
L
Presence of accessory, push-pull torch
(optional)
M
Presence of USB key in connector 6
N
Date and Time.
6�2

MMA Process

O
A
ideal welding condition
first available job
H
M L
B C F
to be saved,
number; to confirm
N
G
press
key,
the selection press
DEL . Press the first button to copy and
the scre-
key
SAVE .
53/58