Door Reversibility - Zanussi ZRT724W Notice D'utilisation

Masquer les pouces Voir aussi pour ZRT724W:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Location
The appliance should be installed well away from sour-
ces of heat such as radiators, boilers, direct sunlight
etc. Ensure that air can circulate freely around the back
of the cabinet. To ensure best performance, if the appli-
ance is positioned below an overhanging wall unit, the
minimum distance between the top of the cabinet and
the wall unit must be at least 100 mm . Ideally, howev-
er, the appliance should not be positioned below over-
hanging wall units. Accurate levelling is ensured by one
or more adjustable feet at the base of the cabinet.
If the cabinet is placed in a corner and the side with the
hinges facing the wall, the distance between the wall
and the cabinet must be at least 10 mm to allow the
door to open enough so that the shelves can be removed.

Door reversibility

Important! To carry out the following operations, we
suggest that this be made with another person that will
keep a firm hold on the doors of the appliance during
the operations.
1. Remove the plug from
the power socket.
2. Open the door of the
freezer. Loosen the hinge.
2
1
3
3. Remove the doors by
pulling them slightly and
remove the hinge.
Warning!
It must be possible to dis-
connect the appliance from
the mains power supply;
the plug must therefore be
easily accessible after in-
stallation.
To change the opening direction of the door, do these
steps:
4. On the opposite side, re-
move the hole covers.
5. Unscrew both adjusta-
ble feet and the screws of
the bottom door hinge. Re-
move the bottom door
hinge and install it on the
opposite side.
31

Publicité

Table des Matières
loading

Table des Matières