Rear Spacers; Door Reversibility - Zanussi ZRA40100XA Notice D'utilisation

• The manufacturer declines all responsibility if
the above safety precautions are not
observed.
• This appliance complies with the E.E.C.
Directives.
Levelling
Accurate levelling prevents the vibration and
noise of the appliance during operation. To
adjust the height of the appliance loosen or
tighten the two adjustable front feet.

Rear spacers

You can find the two spacers in the bag with
documentation.
1. Release the screw.
2. Engage the spacer below the screw.
3. Turn the spacer to the right position.
4. Tighten again the screws.
4
www.zanussi.com
2
1
3

Door reversibility

WARNING!
Before carrying out any operations,
remove the plug from the power
socket.
CAUTION!
To carry out the following
operations, we suggest that this be
made with another person that will
keep a firm hold on the doors of the
appliance during the operations.
Before carrying out any operation,
please be sure that the appliance is
empty. If not, please move all goods
into right temperature for proper
food storage reason.
1. Tilt back the appliance carefully so that the
compressor cannot touch the floor.
2. Remove the plinth (1).
3. Remove the cap (2) and position it on the
opposite side.
4. Unscrew the pins (3) and remove the
washers.
3
2
1
5. Remove the door.
6. Position the pin and the washers on the
opposite side (4).
5
4
6
7. Unscrew the upper pin (1) and place it on
the opposite side (2).
23