Servo Installation; Propeller Installation - Reely SKY Condor Notice D'emploi

Close the hole with the included plastics part (3).
d) Servo Installation
Plug the servo plug of the elevator (1) into the "CH3" receiver output.
Plug the servo plug of the flight control system (2) into the "CH4" receiver output.
e) Propeller Installation
Push the propeller (1) on the motor shaft so that the set screw (2) fits exactly in
the indentation (illustrated here in white).
Secure the set screw with screw locking varnish,
Figure 12
Figure 13
Figure 14
35