Propeller Installation; Important; Upper Aileron Linkage - Reely SKY EP « Waco » RTF 20 79 03 Notice D'emploi

e) Propeller Installation
Push the propeller (1) on the motor shaft so that the grub screw (2) fits exactly
onto the flattened side of the motor shaft).
Secure the grub screw with threadlocker.

Important:

Always check that grub screw is screwed tight. A propeller which
breaks off at full throttle can cause serious damage to individuals
and/or property!
f) Upper Aileron Linkage
Hook the linkage rods (1) into the rudder horn on the upper side of the lower
aileron (2).
Attach the linkage rods (1) to the rudder horn on the underside of the upper
aileron (2).
Turn the clevis (3) to set the linkage rod length so that both ailerons are in the
same position.
40
Figure 9
Figure 10a
Figure 10b