Final Assembly Of The Airplane Model; Assembly Of The Wings - Reely SKY Condor Notice D'emploi



10. Final Assembly of the Airplane Model

Before starting with the assembly of the model, prepare an appropriate surface To achieve excellent flight performance, your model is made of light moulded
foam. However, the material has a very sensitive surface. Small inattentions during the assembly of the model very quickly lead to ugly dents and even holes.
a) Assembly of the Wings
Push the elevator unit (1) into the fuselage (2) from below. Make sure that no
cable is squeezed between the fuselage and the wing.
Attach the wings (1) with the included 2.6 x 16 bolts (2). Make sure that there is
no gap between the components.
32
Figure 5
Figure 6