Manual Storing Of Station Presets; Automatic Memory Of Station Presets; Tuning To Preset Stations; Station Title Search Function - Alpine DVA-9860 Mode D'emploi

Manual Storing of Station Presets

1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of
the preset buttons (1 through 6) into which you
wish to store the station.
The selected station is stored.
The display shows the band, preset no. and station
frequency memorized.
• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.

Automatic Memory of Station Presets

1
Press BAND repeatedly until the desired radio
band is displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while
the automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into buttons 1 to 6 in
order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in preset location no. 1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.

Tuning to Preset Stations

1
Press BAND repeatedly until the desired band is
displayed.
2
Press any one of the station preset buttons (1
through 6) that has your desired radio station in
memory.
The display shows the band, preset number and
frequency of the station selected.

Station Title Search Function

If the title of a radio station is entered, you can search for that radio
station by its title while listening to the currently received radio
station.
.
1
Press SEARCH/Q.S.
Title Search mode.
The first title input blinks in the display.
2
Select the desired title by turning the Rotary
encoder within 10 seconds.
3
Press the Rotary encoder to receive the
frequency of the selected title.
• Title Search mode is canceled by pressing and holding SEARCH/Q.S.
for at least 2 seconds.
• If a station has no title, "NO TITLE" is displayed for 2 seconds.

Frequency Search Function

You can search for a radio station by its frequency.
1
Press and hold SEARCH/Q.S.
seconds in Radio mode to activate Frequency
Search mode.
2
Turn the Rotary encoder within 10 seconds to
select the desired frequency.
3
Press the Rotary encoder to receive the selected
frequency.
• Frequency Search mode is canceled by pressing and holding
SEARCH/Q.S. for at least 2 seconds.
in Radio mode to switch to
for at least 2
9
-EN