Receiving Stored Channels; Channel/Category Search Function; Quick Search Function; Changing The Display - Alpine DVA-9860 Mode D'emploi

Receiving Stored Channels

1
Press BAND to select the desired band.
2
Press the channel preset button that has your
desired satellite channel in memory.

Channel/Category Search Function

You can search for programs by Channel No. or Category.
1
Press SEARCH/Q.S.
to select Channel Search mode or Category Search
mode.
Channel Search mode:
2
Turn the Rotary encoder to select the desired
Channel No.* within 10 seconds.
* The Channel No. is selected within the selected Category.
3
Press Rotary encoder to receive the selected
Channel No.
• Search mode is canceled by pressing and holding SEARCH/Q.S.
at least 2 seconds in Channel Search mode.
• While in Channel Search mode, press 8 or 9 to select another
Category.
• While in Channel Search mode, press SEARCH/Q.S.
to the Category Search mode.
Category Search mode:
2
Turn the Rotary encoder to select the desired
Category within 10 seconds.
3
Press Rotary encoder to receive the selected
Category.
• Search mode is canceled by pressing and holding SEARCH/Q.S.
at least 2 seconds in Category Search mode.
• While in Category Search mode, press SEARCH/Q.S.
to Channel Search mode.
28
-EN
in the XM or SIRIUS mode
for
to switch
for
to switch

Quick Search Function

You can search for all Channels.
1
Press and hold SEARCH/Q.S.
seconds in XM or SIRIUS mode to activate Quick
Search mode.
2
Turn the Rotary encoder to select the desired
Channel within 10 seconds.
The selected Channel is received.

Changing the Display

Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or SIRIUS channel.
The unit can display this text information as explained below.
In XM or SIRIUS mode, press TITLE
Each time you press this button, the display changes as shown
below.
Channel Number → Channel Name → Song Title →
Artist Name → Auxiliary Data Field* → CLOCK →
Channel Number
* XM mode only: When ADF is turned OFF, this information is not
displayed (see "Setting the Auxiliary Data Field Display" on this
page).
• When the "Scroll Setting" (page 21) is set to "SCROLL AUTO,"
the display scrolls continuously.
When the Scroll Setting is set to "SCROLL MANU," the display
scrolls only once after any function is performed (PRESET, BAND,
SEARCH, etc.).
Press and hold TITLE for more than 2 seconds to scroll the
display manually.
• "Channel Number" and "Clock" displays do not scroll.
• Depending on the model, the display may differ from the one
shown above.

Setting the Auxiliary Data Field Display

The XM Auxiliary Data Field (ADF) display can be switched on or
off. There is no ADF function for the SIRIUS receiver.
1
Press and hold F/SETUP for at least 2 seconds to
select the SETUP mode.
2
Select "XM ADF" by pressing g or f
3
Select ON/OFF by pressing BAND.
When setting to ON, Auxiliary Data Field is displayed by
pressing TITLE . (Refer to the "Changing the Display"
section on page 28)
4
Pressing F/SETUP will return to normal mode.
for at least 2
.
.