Multiplex Launcher - Multiplex RX-16-DR MASTER Mode D'emploi

7. MULTIPLEX launcher

This is how the launcher responds when the MASTER receiver has been recognized
correctly. In addition to the software status and the operating status, in this case
"ready for operation", i.e. bound and transmitter detected, the current voltage levels
of the two supply batteries can be seen in the image, intentionally with different
charge states.
In the top left corner under the menu symbol, you will find receiver settings
that are rarely required (such as restarting the receiver, triggering the binding
process, saving and loading receiver settings, factory reset and others). If you
click "Basis" in the graphic menu bar on the right, you will get extended device
information.
The extended device information shows all servo signals coming from the trans-
mitter graphically and exactly in millisecond values. Servos in middle position
are marked as 1500. If you now move one of the transmitter's encoders, the
corresponding display will change. This makes it particularly easy to follow the
effects of complicated mixes coming from the transmitter.
The error memory of the receiver is also displayed in the top left corner. If you
click it, the errors that have occurred in the receiver are itemized and can also
be deleted again.
If you have switched your MASTER to "Diversity", you will see below which
receiver is currently providing its signal.
19