Meanings Of The Led Displays/Charging Modes - ProCharger 4.000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Meanings of the LED displays/charging modes

Li-Ion
CAN-
BUS
Functional displays
The charger is connected to the mains power and ready for operation.
The charging mode "motorcycle" is selected. The maximum charging
current is 1000 mA. The maximum charge voltage is 14.3 V. Recommended
for battery capacities of 1.2-30 Ah.
The charging mode "car" is selected. The maximum charging current is
4000 mA. The maximum charge voltage is 14.3 V. Recommended for battery
capacities of 30-60 Ah.
The charging mode "Li-ion" for charging 12 V lithium-ion vehicle batteries is
Li-Ion
selected. The maximum charging current is 4000 mA. The maximum charge
voltage is 14.3 V.
The charging mode „cold ambient temperature/AGM battery" is selected.
This mode is for optimised charging on cold winter days (ambient
temperature below 5°C) or for the special charging process for lead-fleece
(AGM) batteries, if an increased charging voltage is recommended by the
battery manufacturer. The maximum charging current is 4000 mA. The
maximum charge voltage is increased to 14.7 V.
The charging mode "CAN bus" is selected. This charging mode is designed
CAN-
BUS
for charging batteries via the vehicle socket on vehicles with a CAN bus
system. The maximum charging current is 1000 mA. The maximum charge
voltage is 14.3 V.
25

Publicité

Table des Matières
loading

Table des Matières