Product Description; Quick-Start Guide - ProCharger 4.000 Mode D'emploi

1. Product description

The ProCharger 4000 is an advanced and intelligent battery charging, diagnosis
and test device for all 12 V (6 cells) lead-acid, lead-gel, lead-fleece (AGM), calcium,
pure lead and lithium-ion vehicle batteries. State-of-the-art characteristic-controlled
charging technology, in conjunction with an intelligent software controller, ensures
optimum charging and care at all times, and can even bring your battery back to life.
Vehicles with a CAN bus system can also be charged with the optionally available
practical ProCharger charger plug using the existing vehicle socket. 15 LED displays
permanently inform you of the current operating status. The ProCharger 4000 is
safeguarded against overload, pole reversal and short-circuit, and is also spark-free.
Before you put the device into operation, read these operating instructions thoroughly.
This is the only way to familiarise yourself with all the functional options, prevent
incorrect operation and protect yourself and your device from possible damage as a
result of improper use.

2. Quick-start guide

Beforehand, read the Safety instructions and the points Preparation, connection and
operation.
1. Connect one of the charging cables (with charging clamps or ring connectors) to
the charger using a quick connector.
2. Connect the charging clamps or ring connectors to the battery with the correct
polarity (the black clamp (minus) to the vehicle chassis or the engine block when
the battery is installed).
3. Connect the mains plug to the mains socket. The „
4. Now, using the MODE button, select the required charging mode within
5 seconds. The charging process then starts automatically and the LEDs
„ , ,
battery.
5. The charging process is complete when the
„ " LED lights up.
6. Disconnect the mains plug from the socket.
7. Disconnect the charging clamps from the battery (or the black charging clamp
from the vehicle chassis or engine block if the battery is installed) or disconnect
the charging cable with the ring connectors from the charger using a plug
connector.
24
, " light up in accordance with the charge level in the connected
" LED lights up.