Maintenance; Application Area; Storage Conditions; Trouble Shooting - Dexter 20VSD2-35RC.1A Mode D'emploi

10. MAINTENANCE

The cordless drill is designed for use in temperate regions with a characteristic temperature of 0 ° C
to + 50 ° C, relative humidity not more than 80%, the absence of direct exposure to atmospheric
precipitation and excessive dust content of the air.
Requirements for room conditions
creates sparks, which can lead to the ignition of dust, steam.
Shelf life - 4 years provided that the products are stored indoors with natural ventilation in the
package at an air temperature of --20 ° C to 40 ° C and a relative humidity of not more than 80%.

11. TROUBLE SHOOTING

Problems
The machine stops The battery is in low
working after power.
rotating slowly.
The drill bit or The drill bit or other
other screwdriver screwdriver is not
tightly clamped with
the chuck
Abnormal sound of The shift button is
gearbox. not in place

Application area

Storage conditions

Probable causes
Need to charge the battery pack before
operating.
Put the drill bit or screwdriver into the middle
of the three jaws of the chuck, re-tighten and
visually check the drill bit or the screwdriver
without tilting.
you need to push the shift button in place
(before or behind).

Corrective action

FR FR
ES ES
PT PT
IT IT
EL EL
PL PL
RU RU
UA KZ
KZ UA
RO RO
BR BR
EN
EN
253