Fault - Angelo Po 090FT1E Manuel D'utilisation Et D'installation

TROUBLESHOOTING
The appliance has been tested before being put
into service.
The information provided below is intended to as-
sist in the identification and correction of any anom-
alies and malfunctions which might occur during
use.
Faults
The heating elements do not
come on.
A

FAULT

Electrical connection not made
Safety thermostat tripped.
Switch faulty.
C
B
The user can solve some of these problems
himself, but for others specific technical
knowledge or skill is required, and so they
must only be carried out by qualified staff with
recognised experience acquired in the specific
sector of operation.
Causes
correctly.
- 15 -
B
IDM-39616101200.tif
Remedies
Check the connection of the
electrical wires.
Carry out the appliance reset (see
page 10).
Replace the switch.
6
IT
GB
DE
FR
ES
English