Installing Accessories - Angelo Po 090FT1E Manuel D'utilisation Et D'installation

INSTALLING ACCESSORIES

Screw the feet (A) onto the structure in the connec-
tion points.
LEVELLING
Adjust the floor-mounted feet (A) to level the appli-
ance.
IT
ASSEMBLY APPLIANCES IN BANKS
To assemble appliances in banks (side by side)
GB
proceed as described below.
1 - Undo the screws (C) and remove the control
panels (B).
DE
2 - Apply masking tape to the edges to be placed
side by side.
FR
3 - Apply food-approved sealant to the edges to be
placed side by side.
ES
4 - Place the appliances side by side.
5 - Connect the appliance using the screws and
nuts (D-E).
6 - Remove the excess sealant and the masking
tape.
7 - Apply the sealant to the inside of the lid (F), and
fit it to cover the fixing zone.
8 - Replace the control panels (B) on completion of
the operation.
English
A
C
D
- 18 -
A
IDM-39614401500.tif
IDM-39614401600.tif
B
F
E
IDM-39616102600.tif