Safety And Information Signs; Standard Accessories; Optional Accessories - Angelo Po 090FT1E Manuel D'utilisation Et D'installation

Table des Matières

Les langues disponibles

The illustration shows the position of the signs pro-

vided.

A)Nameplate with manufacturer and appliance

data.

B)Burn hazard: watch out for hot surfaces.

C)General hazard: when washing the appliance do

not point pressurised water jets at internal parts.

D)General hazard: read the manual carefully before

carrying out any procedure.

E)General hazard: all relevant regulations must be

complied with. "Install in compliance with the rele-

vant regulations and use in well ventilated premises

only".

F) General hazard: all relevant regulations must be

complied with. "No liability is accepted in case of fail-

ure to comply with the installation and commission-

ing instructions".

G)CE marking: indicates that the appliance is

compliant with the relevant norms.

The appliance is delivered complete with the

following:

A)Residue drain extension.

B)Drip tray support

C)Drip tray

The appliance can be equipped with the following

accessories on request.

A)Splash guard frame

B)Scraper for cleaning the plate

C)Set of blades for smooth plate

D)Feet (For version 091FTE-191FTE only)

E)Hatches (PB9) (For version 091FTE-191FTE only)

F) "Over cupboard" installation kit (see page 18)

G)"Bridge" installation kit (see page 18)

H)Supporting frame kit (see page 18)

L) Supporting beam kit (see page 18)

English