General Safety Rules - Briggs & Stratton Gardeo GTDTAC51HP6TES-BS625 Traduction Des Instructions D'origine

GENERAL SAFETY RULES

When using petrol tools, basic
safety precautions, including
the following, should always be
followed to reduce the risk of
serious personal injury and/or
damage to the unit.
Read all these instruction
before operating this product
and retain these instructions for
This machine produces an
electromagnetic field during
operation. Under some
circumstances this field may
interfere with active or passive
medical implants. To reduce
the risk of serious or
fatal injury, we recommend
persons with medical implants
to consult their physician and
the medical implant
manufacturer before operating
Training
• Read the instructions carefully. Be familiar
with the controls and the proper use of the
equipment.
• Never allow children or people unfamiliar
with these instructions to use the lawn
mower. Local regulations can restrict the
age of the operator.
• Never mow while people, especially
children, or pets are nearby
GB PETROL LAWN MOWER
WARNING
future reference.
WARNING
this machine.
• Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to other people or their
property.
Preparation
• While mowing, always wear
substantial footwear and long
trousers. Do not operate the
equipment when barefoot or wearing
open sandals.
• Thoroughly inspect the area where
the equipment is to be used and
remove all objects which can be
thrown by the machine.
• WARNING: Gasoline is highly
flammable:
- store fuel in containers specifically
designed for this purpose;
- refuel outdoors only and do not
smoke while refueling;
- add fuel before starting the engine.
Never remove the cap of the fuel tank
or add petrol while the engine is
running or when the engine is hot;
- if petrol is spilled, do not attempt to
start the engine but move the
machine away from the area of
spillage and avoid creating any
source of ignition until petrol vapors
have dissipated;
- replace all fuel tank and container
caps securely.
• Replace faulty silencers.
• Before using, always visually
inspect to see that the blades, blade
bolts and cutter assembly are not
worn or damaged. Replace worn or
82