Charging The Battery; Cutting Height Adjustment - Briggs & Stratton Gardeo GTDTAC51HP6TES-BS625 Traduction Des Instructions D'origine

Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow flames
or sparks in the area where the engine is refueled or where gasoline is stored. Avoid
repeated or prolonged contact with skin or breathing of vapor.
After refueling, tighten the fuel tank cap securely. If any fuel was spilled, make sure the
area is dry before starting the engine.

Charging the battery

Charge the battery before use. Before using the electric starter, the battery must be charged
for 5 hours. Place the charger plug into the hole in the battery and plug the charger into a
power supply.

Cutting Height Adjustment

Check the cutting height settings, and make any necessary adjustments.
The blade can cause serious injury. Stop the engine
before adjusting cutting height.
101
75 mm
25 mm