Operating With A Somfy Sun Sensor; Additional Settings; Tips And Recommendations For Use - SOMFY Sonesse 50 RTS Notice D'installation Et D'utilisation Succincte

3.4. OPERATING WITH A SOMFY SUN SENSOR

Refer to the corresponding guide.

3.5. ADDITIONAL SETTINGS

3.5.1. Modifying the favourite position (my)
Place the motorised product in the desired favourite
1)
position (my).
Press my
2)
product moves up and down: the desired favourite
position (my) has been programmed.
3.5.2. Deleting the favourite position (my)
1) Press my: the motorised product starts to move,
and stops in the favourite position (my).
2) Press my again until the motorised product moves:
the favourite position (my) is deleted.
3.5.3. Adding/Deleting Somfy control points and
sensors
Refer to the corresponding guide.

3.6. TIPS AND RECOMMENDATIONS FOR USE

3.6.1. Questions about the Sonesse 50?
Observations
The motorised product
The control point battery is weak.
does not operate.
The motorisation is in thermal protection
mode.
If the motorised product still does not work, contact a motorisation and home automation
professional.
3.6.2. Replacing a lost or broken Somfy control point
To replace a lost or broken control point, contact a motorisation and home automation
professional.
Copyright © 2014 Somfy SAS. All rights reserved.
motorised
Possible causes
Check whether the battery is weak and replace
it if necessary.
Wait for the motor to cool down.
Images not contractually binding
2)
1)
2)
1)
Solutions
EN
19