IARP MIRA 23 N FLAT Instructions D'emploi Et D'entretien page 16

INSTALLATION
Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap then
dry it with a soft cloth; for the glass parts only use specific products, avoiding the use of water which
can leave on the glasses limestone residues.
Keep a distance from the wall of 10 cm.
•
at least.
• Cabinet must be installed on a perfectly even
surface (please settle the adjustable feet),
far away from any heat source (radiators,
stoves, etc) including sun rays.
• Good running of the cabinet can be
compromised in cases where the airflow is
disturbed (wind, ventilators, air conditioning
outlets, etc).
• Smooth running of the cabinet is assisted
when sufficient air is permitted to flow
through the bottom of the unit; it is very important that the grills at the base are kept uncovered.
• Do not expose the cabinet to rain.
• Install and position the unit in such a
way so as to allow easy access to the
power socket.
• Never use electrical equipment in the
refrigerated compartment
• Never place containers of liquid on or
immediately above the ticket counter;
should the content spill out, it would
damage the counter.
THE REFRIGERATOR IS NOT
SUITABLE FOR WORKING IN
DANGEROUS ENVIRONMENT
WITH RISK OF FIRE, EXPLOSIONS
OR RADIATIONS.
Insert between glass door and motor space the
wood part to avoid door frame foldings during
transport.
Reinsert it when the cabinet is removed.
-16-