Positioning And Mounting - Bury technologies CC 9050 Mode D'emploi

Installation of the hands-free car kit
22
3. Scope of supply CC 9050 / CC 9051
110 cm
200 cm
100 cm
Description of the components:
1) Electronics box (CC 9051 with integrated loudspeaker switch-box)
2) Monitor on installation pad, cleaning cloth
3) Fuses
4) Hook-and-loop fastener
5) Fixing screws for electronics box
6) Aux cable
7) Microphone
8) Power supply cables
9) Phone-In cable
10) Loudspeaker cable (CC 9051)

4. Positioning and mounting

Step 1:
First of all, please choose the most convenient position for the monitor
and the installation pad in your vehicle by attaching the monitor / hook-
and-loop fastener to the pad and checking different positions in the
vehicle. After having found a suitable position for the monitor in the
vehicle you can mount / attach the installation pad / hook-and-loop
fastener accordingly. Please use the enclosed cleaning cloth for degre-
asing the surfaces you want to attach the installation pad to. Please
note that in case of high variations in temperatures - depending on the
structure and the features - decolourisations of the surfaces can occur
during the subsequent utilisation.
Important:
When positioning the monitor please take care that the

monitor does not impair the view onto the road, that it will
not be installed in the impact zone of the passenger com-
partment (amongst others in the airbag inflation zones) and
that cables may be laid without any problems.
The installation pad / hook-and-loop fastener can be af-

fixed just once, removing could damage the adhesive area.
In case of high variations in temperatures - depending on
the structure and the features - decolourisations of the sur-
faces can occur during the subsequent utilization.
23