Electromagnetic Compatibility - Ameda Mya Mode D'emploi

9. ELECTROMAGNETIC COMPATIBILITY

Guidelines and manufacturer's declaration – electromagnetic emissions
The AMEDA MYA is intended for use in the electromagnetic environment specified in the table below.
The customer or the user of the AMEDA MYA should assure that it is used in such environment.
Phenomenon
Terminal disturbance
voltages
Radiated disturbance
AC-Mains Harmonics
AC-Mains Voltage
fluctuations and
flicker
Electrostatic
Discharge
Immunity
Radiated RF
Electromagnetic
Field Immunity
Immunity to Proximity
Fields from RF wire-
less Communications
Equipment
Electrical fast
transients / bursts
Surges
Conducted
disturbances induced
by RF fields
RATED power
frequency
magnetic fields
Voltage dips
Voltage interrup-
tions
Basic EMC
Port
Standard or
Tested
Test Method
CISPR11:2009 AC Main
+A1:2010
CISPR11:2009 Enclosure
+A1:2010
IEC 61000-3- AC Main
2:2005
+A1:2008
+A2:2009
IEC 61000-3- AC Main
3:2013
IEC 61000-4- Enclosure
2:2008
IEC 61000-4- Enclosure
3:2006
+A1:2007
+A2:2010
IEC 60601-1- Enclosure
2:2014
Table 10
IEC 61000-4- AC Main
4:2012
IEC 61000-4- AC Main
5:2005
IEC 61000-4- AC Main
6:2013
IEC 61000-4- Enclosure
8:2009
IEC 61000-4- AC Main
11:2004
IEC 61000-4- AC Main
11:2004
Test Voltage
AC 120 V~, 60 Hz Group 1, Class B
AC 220 V~, 60 Hz
AC 230 V~, 50 Hz
DC 7.4 V
AC 120 V~, 60 Hz Group 1, Class B
AC 220 V~, 60 Hz
AC 230 V~, 50 Hz
DC 7.4 V
220 V~, 60 Hz Class A
230 V~, 50 Hz
220 V~, 50 Hz Pst : 1
230 V~, 50 Hz Plt : 0.65
Tmax : 0.5
AC 120 V~, 60 Hz ±8 kV/Contact
AC 220 V~, 60 Hz
AC 230 V~, 50 Hz ±2, ±4, ±8,
DC 7.4 V ±15 kV/Air
AC 120 V~, 60 Hz 10V/m
AC 220 V~, 60 Hz 80MHz-2.7GHz
AC 230 V~, 50 Hz 80% AM at
DC 7.4 V 1 kHz
AC 120 V~, 60 Hz Table 9 in
AC 220 V~, 60 Hz IEC 60601-1-2:2014
AC 230 V~, 50 Hz
DC 7.4 V
AC 120 V~, 60 Hz
AC 220 V~, 60 Hz ±2 kV, 100 kHz
AC 230 V~, 50 Hz
AC 120 V~, 60 Hz Line to Line
AC 220 V~, 60 Hz ±0.5 kV, ±1.0 kV
AC 230 V~, 50 Hz
AC 120 V~, 60 Hz 3 V
AC 220 V~, 60 Hz 0.15 - 80 MHz
AC 230 V~, 50 Hz 6 V in ISM
bands Between 0.15 MHz
and 80 MHz
80% AM at 1 kHz
AC 120 V~, 60 Hz 30 A/m
AC 220 V~, 60 Hz 50 Hz & 60 Hz
AC 230 V~, 50 Hz
DC 7.4 V
100 V~, 50 Hz 0% UT : 0.5 cycle at 0°, 45°, 90°,
240 V~, 50 Hz 135°, 180°, 225°, 270° and 315°
0% UT : 1 cycle and 70% UT :
25/30
Cycles Single phase : at 0°
100 V~, 50 Hz 0% UT : 250/300 Cycles
240 V~, 50 Hz
Test Level/
Requirement
Dmax : 4%
Dc : 3.3%
25