Table des Matières
Publicité
Communication Fieldbus / Appareil de mesure
Paramètres du bus Standard Transducer Block (TB)
Parameter
10 TRANSDUCER_TYPE
11 XD_ERROR
12 COLLECTION_DIRECTORY
Mettler-Specific Parameters – Output
13 INPUT_RANGE.
14 POLARIZATION_VOLTAGE
15 SENSOR_TYPE
16 APPLICATION
17 PRIMARY_VALUE
18 PRIMARY_VALUE_TYPE
19 FILTER_TIME
94
Description
Identifies the transducer type.
A transducer block sub-code. XD_ERROR
contains the highest priority alarm that has
been activated in the TB_DETAILED_STATUS
parameter.
A directory that specifies the number,
starting indices, and DD item of ID's of the
data collection in each transducer within a
transducer block. Used by the host for
efficient transfer of information.
Selects the connection of the sensor
Sets the polarization voltage
Selects the used sensor type.
Selects the measurement method
(DO/ GAS)
Shows the primary value and status
Value
Status
Selects the displayed primary value depending
on the selected measuring method in APPLI-
CATION parameter
Sets the filter time of the input filter
Transmetteur O
4100 e FF
2
Publicité
Table des Matières
