Safety Instructions For Maintenance - Bartscher 300435 Mode D'emploi

o If any liquid falls accidentally into the device, unplug it and do not use it. Contact a
service centre or your dealer.
o Important: Do not use metal tools (such as scissors, knife, punch or scraper) to
eliminate impurities as they could damage the steel surface, causing it to corrode.
o Furthermore, improper use of chlorine-based detergents or hydrochloric acid,
hydrofluoric acid or sulphuric acid (as are some decalcifying agents) can reduce
the typical brightness of the stainless steel and affect its resistance.
o To clean the accessories (containers, lids, etc.) see the instructions of the individual
accessory.
o The liquid protection tank of the device
(10A) can be completely removed and
washed in the upper rack of the
dishwasher. Rinse it like normal kitchen
utensils and leave it to dry completely.
Then put it back in the vacuum chamber.
o Use only a soft cloth and never use abrasive detergents which could scratch the
surface.
o After cleaning, use a soft and dry cloth to dry and polish the surface.

6.3 Safety instructions for maintenance

o Occasionally observe the power cable to see if it is damaged. Never use the
machine if the cable is damaged. If the cable is damaged, have it replaced by a
service centre or by a qualified electrician to avoid danger.
o In case of failures or malfunctioning, contact the dealer or our customer service.
Read the suggestions for solving the problem in section 7.
o Maintenance and repairs must only be carried out by qualified personnel using
genuine spare parts and accessories. Never try repairing the device on your own.
- 56 -