Truvox International Orbis ECO 200 Manuel D'utilisation page 5

Accessories
Drive board
Polypropylene scrubbing brush
Palmyra floor brush
Carpet shampoo brush
Bassine polishing brush
Solution tank
Anti-splash skirt
Fault diagnosis
The following simple checks may be performed by the operator:
Trouble
Machine not working
Machine not working
Machine wobbles or vibrates
excessively.
* If the fuse blows several times, the machine should be checked by an authorised Service Agent
PLEASE REFER TO THE BACK OF THE MANUAL FOR PICTORIAL
5
Orbis ECO 200
(43cm)
OB45200/ ECO
05-4714-0000
05-3431-0500
05-3435-0500
05-3433-0000
05-3434-0500
05-5000-0000
05-3151-0000
Reason
- Lack of voltage/electrical supply.
- Switch interlock incorrectly
operated.
- Loose connection to motor.
- Pad worn or damaged.
- Pad dirty.
- Pad loose.
INSTRUCTIONS
Orbis ECO 400 Orbis ECO DUO
(43cm)
OB45400/ECO OBLP452/400/ECO
05-3437-0500
05-3469-0500
05-3435-0500
05-3434-0500
05-5000-0000
05-3151-0000
Remedy
- Check fuse *, supply cord, plug
and socket outlet.
- Check operating procedure in
instructions.
- Check motor lead connector is
fully inserted into motor socket.
- Renew pad.
- Clean the pad.
- Tighten pad lock.
(43cm)
00-3437-0000
05-3469-0500
05-3435-0500
05-5000-0000
06-16