Cleaning And Care - SOLIS CREMALATTE Mode D'emploi

▲

CLEANING AND CARE

• Always pull the plug and let the appliance cool down before cleaning. Caution:
The heater plate and the glass jug are hot after use!
• Remove the blender element from the cool glass jug and rinse it carefully under
running water (fig. 14).
• After that, you should hand-wash the jug and the lid in warm water with some
mild detergent and a soft sponge or cloth, then re-rinse and carefully dry it (fig.
15). You can clean the jug (not the lid, the blender elements and under no cir-
cumstances the motor base) in the top drawer of the dish washer. Over time, this
might lead to signs of wear on the material and the print.
• Never use aggressive or abrasive detergents or solutions or any other hard resp.
scratching objects to clean parts of the appliance. They might damage the sur-
face.
• Clean the motor base and the heater plate only with a wet cloth. Never submerge
the motor base with the power plug and cord in liquid or hold it under running
water (fig. 16 and 17).
• Store the spare blender elements in the bottom of the motor base resp. place
one blender element back in the glass jug. Like that, they are always at hand
(fig. 18).
fig. 14
fig. 17
fig. 15
fig. 18
fig. 16
55