Cleaning And Care - SOLIS CITRUS PRESS STATION 8454 Mode D'emploi

▲

CLEANING AND CARE

Before disassembling or cleaning the appliance, please always check if the plug
●
has been pulled. Of course, this also applies if you want to reassemble or store
the appliance.
As described below, all surfaces and appliance parts that come into contact with
●
foods while juicing should be cleaned carefully.
We recommend rinsing all removable parts (drip tray, juice collection tray with
●
juice spout, pulp filter, juicing cone, pressing cone – potentially with dust cover
– and carrier) immediately after use in warm water to remove the still-wet pulp
and the pips. Let all parts air dry before reassembling them.
For thorough cleaning, all removable parts should be cleaned in warm dishwater.
●
All removable parts can be cleaned in the dishwasher.
The motor base and the lever press arm should be thoroughly cleaned with a
●
slightly moist cloth. Let all parts dry completely before reassembling them. Never
submerge the motor base, the power cord or the power plug in water or other
liquids.
Notes:
Rinse or clean all removable appliance parts immediately after use. Dried citrus
●
fruit pulp is difficult to remove and might cause stains. Should any stains appear,
wipe the affected areas clean with undiluted dishwashing liquid and a moist
cloth. Rinse the accessories and dry everything carefully.
Do not place the pulp filter or the other removable parts in bleach. For sterilisa-
●
tion, the appliance parts can not be subjected to high temperatures.
Never use aggressive or scouring detergents or solutions to clean the motor base
●
and the appliance parts – they might scratch the surface.
All removable parts can be cleaned in the dishwasher.
●
GB
71