Device Description; Battery Installation - Steinberg Systems SBS-LDM-60 Manuel D'utilisation

U S E R M A N U A L
TECHNICAL DATA
Parameter description Parameter value
Product name Distance meter
Model SBS-
LDM-60
Distance measurement 0,05-60,00
range [m]
Measurement accuracy +/- 2,00
[mm]
Laser type [nm] 620-690
Laser class II, <1mw
Single measurement 0,25
time [s]
Battery type AAA, 1,5V
Measurement units m, ft, in; m
Dimensions [mm] 110x40x25
Weight [kg] 0,076
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies
EN components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
NOTE: Laser beam. It is forbidden to look at the
laser light. Class 2 laser;
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details, it may
differ from the actual product.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
SBS-
The terms „device" or „product" are used in the warnings
LDM-80
and instructions to refer to < Distance meter >. Do not use
in very humid environments or in the direct vicinity of water
0,05-80,00
tanks.
2.1. SAFE DEVICE USE
a) If there are any doubts as to the correct operation of
the device, contact the manufacturer's support service.
b) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
c) Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
d) Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
e) Keep packaging elements and small assembly parts in
,ft
2 2 a place not available to children.
f) Keep the device away from children and animals.
g) The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
h) The device is not a toy. Children must be supervised to
ensure that they do not play with the device.
i) Do not use the device if the ON/OFF switch does not
and function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
j) When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
k) Keep the device in perfect technical condition.
l) Keep the device out of the reach of children.
m) Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
n) To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
o) Do not leave this appliance unattended while it is in
use.
p) Clean the device regularly to prevent stubborn grime
from accumulating.
q) The device is not a toy. Cleaning and maintenance
may not be carried out by children without supervision
by an adult person.
r) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
s) If the device is not used for a long time, it is
recommended to remove batteries.
t) Do not expose the product to mechanical pressure.
u) Keep unused batteries out of reach of children.
v) When replacing the battery, ensure the polarity is
correct.
w) Do not direct laser beam at people and animals.
Non-compliance with this instruction may lead to
irreversible eyesight damage.
x) Do not look directly at laser lens. Non-compliance
with this instruction may lead to irreversible eyesight
damage.
6
REMEMBER! When using the device, protect
children and other bystanders.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is intended for distance and surface measurement
by using a laser beam.
The user is liable for any damage resulting from
unintended use of the device.

3.1. DEVICE DESCRIPTION

1
2
3
4
1. Display
2. ON button/ a laser beam trigger
3. +/- button and historical data records
4. Changing a reference point
5. Changing a measurement mode/ unit (m, ft, in;
m ,ft
2 2
6. Clear; C/ OFF buton
7. Level
3.2. PREPARING FOR USE / DEVICE USE

3.2.1 BATTERY INSTALLATION

1. Remove the battery compartment lid.
2. Place batteries in their destination according to their
polarisation.
3. Put the battery compartment lid back.
NOTE: If the device display [1] shows low battery and
it is necessary to replace the battery with a new one,
proceed in the same way as above.
3.2.2. MEASURING
CAUTION: Make sure that there is no flashing light source or
fluorescent lamp near a target when using laser. They may
negatively influence measurement results.
1. Press [2] to turn the device on.
2. Press [2] again, battery voltage and laser intensity
level icons will appear on the display.
Rev. 12.07.2019
Rev. 12.07.2019
3.
4.
5.
6.
5
6
7 7.
)
8.
a)
b)
c)
d)
9.
10.
11.
12.
7
Press [4] to change the reference point (front or back of
the device)
Press and hold [5] to change a default measurement
unit (m).
Press [2] to activate the laser. Direct the laser at
a target.
Press [2] again to activate a single measurement
mode. A result will appear on the display.
Press and hold [2] to activate a continuous
measurement mode. MIN and MAX values will appear
on the display.
Press [5] to choose a suitable measurement function.
A proper icon will appear on the display.
continuous measurement ( )
surface measurement ( )
volume measurement ( )
Pythagorean measurement ( )
Press [3] to use an adding or subtracting
measurement results function.
Press and hold [3] to move to historical data records.
Press [3] to review recorded values (20 last readings).
Caution: Measurement results are saved automatically
in a device memory.
Press [6] to clear last instruction or reading.
Press and hold [6] to turn the device off.
Caution: A laser beam deactivates automatically after
30 sec.
Caution: The device turns off automatically after 3 min.
EN