Function And Application; Transport And Storage - Festo HSW-10 Série Notice D'utilisation

HSW−...−AP/A S
3

Function and application

By means of the path guide 3 and the linear
guide 6 a movement in a vertical and hori
zontal direction is forced (y−z path). Spring
clamping elements 8 fitted to the end stops
9 guarantee a high degree of repetition
accuracy in positioning. Self−adjusting hy
draulic shock absorbers 1 in the end posi
tions cushion the movement. The end posi
tions can be scanned with proximity switches
of type SME/SMT−8−... The switching status
of the proximity switches can be observed
through the viewing window when the protective cover is fitted on.
The stroke range for both end positions (receive and release positions) is set
separately depending on the installation position:
via the adjusting screws for angle setting 4
via the shock absorbers/rubber buffers in the stop system 1.
Handling module type HSW−... has been designed for use in automated component
assembly in handling and fitting systems.
The HSW−... is particularly suitable for handling small parts at high speed,
e.g. when inserting, turning over or joining.
4

Transport and storage

Take the weight of the HSW−... into
S
consideration.
Depending on the size, the basic design
can weigh up to 5.5 kg.
Consider the following recommendations
S
regarding storage:
storage duration:
storage temperature:
Festo HSW−...−AP/AS 0707a English
Fig. 4
< 48 months
Fig. 5
+20 °C
37