Salvis Master Mode D'emploi page 21

Fill to overflow
pipe
Lever for
water tap
Open
Full power:
Heating up,
rolling boil
2/3 power:
Lightly rolling boil
Indicator
light
Fill level mark
Water inlet pipe
Close
Temperature
range 55 to
1005C:
Keeping warm,
steeping,
simmering
Rotary switch types
Illuminated ring
Filling the tank
CAUTION! Water can boil over. Note
the water fill level. Do not fill above the fill level
mark.
Manual regulation of the water supply: The
filling process must be supervised and switched
off by hand.
D To speed up the heating-up time: fill with hot
water and cover the tank while it is heating.
. Swivel the water supply pipe over the tank.
. Open the water supply tap.
. Open the water tap - turn the lever to the
left.
. Close water tap as soon as the fill level is
reached - turn lever to the right.
Switching on the heating
. Turn the rotary switch to the "Full power"
position to speed up the heating time.
D The indicator lamp or the illuminated ring will
light up.
. When using the appliance, set the desired
temperature or power using the rotary
switch.
en
21 / 56