Oven Preparation; Turning On The Mechanical Oven - OEM PRATICO C641 Mode D'emploi Et D'entretien

5.4 - OVEN PREPARATION

Pizza can be baked either directly on the refractory oven
surface or in the baking-tin.
Here below you can find some instructions to adjust the
different parameters.
5.4.a - Turning on the mechanical oven (Fig. 4)
IMPORTANT
When you are going to start the oven, do
not adjust ceiling and bedplate resistances
at their maximum capacity, since the oven
temperature would in such a case be 50°
- 60° C higher than the set one and pizzas
will burn.
• Press the button (1) onto ON, the lamp (3) and (4) of
both bedplate and crown plate resistances light up.
• Make sure the rotary knob (5) and (6) of bedplate and
crown plate resistances are on the wished tempera-
ture value.
• Wait until the temperature inside the oven reaches the
set value, this occurs when the lamp (3) and (4) go
out and indicates that the set temperature is reached.
EN - 20
PRATICO
C641 - C642 - C643
Functioning
FIG. 4