Digital Oven Control Panel And Warning Lights - OEM PRATICO C641 Mode D'emploi Et D'entretien

PRATICO
C641 - C642 - C643
Functioning
5.3 - DIGITAL OVEN CONTROL PANEL AND
WARNING LIGHTS (Fig. 3)
On the oven, there are the following control elements:
1. Line key ON/OFF
Pressing it, the display (2) lights up and power to the
controls is enabled.
With the oven on, pressing and holding down the
button (1) for a few seconds, the light in the chamber
comes on; to turn off the light, press and hold down
the button (1) for a few seconds.
2. Display
The set and real temperature as well as the ceiling
and bedplate resistance functioning percentage are
displayed.
3. Ceiling resistance capacity
Pressing it, the connection percentage value of the
upper resistances is displayed; to increase it press
(4), to reduce it press
4. Increment key
To increase the values to be set.
5. Decrement key
To reduce the values to be set.
6. Bedplate resistance capacity
Pressing it, the connection percentage value of the
lower resistances is displayed; to increase it press
(4), to reduce it press
Temperature setting
The actual oven temperature is shown on the display
(2). To change the set temperature, simultaneously press
the and buttons (the set temperature will be
shown on the display), then within 5 seconds press the
button to increase or the
it. After approximately 10 seconds from the temperature
setting, a temperature self-entering occurs and the real
oven temperature is displayed.
(5).
(5).
button to decrease
FIG. 3
5
2
3
1
4
6
EN - 19