Pause Cooking; Recall Function - ETNA AKI683 Série Mode D'emploi

OPERATION OF THE HOB
Disconnection of Bridge induction cooking zones
1. Simultaneously touch the cooking zone keys of the connected cooking zones.
The connection symbol will disappear on the rear cooking zone display.
▷

Pause cooking

This function stops the cooking activity temporarily (max. 10 minutes); the extraction will go to
the lowest setting and timers are paused.
1. Touch the pause key.
All the displays show the pause symbol.
▷
2. To continue cooking, touch the pause key for at least 1 second until it flashes.
3. Touch any other key within 10 seconds and the cooking process will continue.
▷ The hob will automatically switch off after 10 minutes if the pause function is not
switched off in the meantime.

Recall function

If the hob was switched off accidentally with the On/off key, all settings can be restored using the
recall function.
1. Touch the on/off key again within 6 seconds.
The pause key is flashing.
▷
2. Touch the pause key within 6 seconds.
The previous settings are active again.
▷
EN 17