Maintenance; Cleaning; Filters And Collect Tray - ETNA AKI683 Série Mode D'emploi

MAINTENANCE

Cleaning

First use
• Use a damp cloth to clean and dry the glass surface before using it for the first time.
• It is recommended to dry the appliance after having cleaned it with a damp cloth, in order to
prevent the build-up of limescale.
Daily cleaning
• Although food spills cannot burn into the glass, we nevertheless recommend you to clean
the hob immediately after use.
• Best for daily cleaning is a damp cloth with a mild cleaning agent.
• Dry with kitchen paper or a dry teacloth.
Stubborn stains
• Stubborn stains can also be removed with a mild cleaning agent such as washing-up liquid.
• Remove watermarks and lime scale with vinegar.
• Metalmarks (caused by sliding pans) can be difficult to remove. Special agents are available.
• Use a glass scraper to remove food spills. Melted plastic and sugar is also best removed
with a glass scraper.
Never use abrasives. They leave scratches in which dirt and lime scale
can accumulate. Never use anything sharp such as steel wool or scourers.

Filters and collect tray

Grease filters
In the display of the extraction unit, 'F' and 'G' will be shown alternately after 30 operating hours
of the extraction unit. The grease filters should now be cleaned.
These must be cleaned once a month (or when the filter saturation indication system indicates
this necessity). Do not use aggressive cleaning agents and preferably clean the filter manually
or in the dishwasher at a low temperature and with a short program. Place the filters with the
opening downwards in the dishwasher so that the water can run out. The cleaning agents used
in dishwashers make the aluminum dull faster. This is normal.
After the cleaning and replacing of the grease filters, reset the memory of the filter saturation
indication.
EN 30