ETNA AKI683 Série Mode D'emploi page 63

POWER LIMITER
5. Release the minute minder key.
"C" is flashing alternately with "0" on the cooking zone display on the rear left.
▷
The configuration value appears in the cooking zone display on the front left.
▷
6. Touch the cooking zone key on the rear left and choose "8" by using the slide control.
"C" is flashing alternately with "8" on the cooking zone display on the rear left.
▷
7. Touch the cooking zone key on the front left and select the power limitation wanted with the
slide control (see table).
8. Then, touch and hold the On/off key until all the display segments disappear.
The hob is now ready for use with the selected power limiter active.
▷
Setting slide control
0
1
2
Setting of the power limiter
7400W
6000W
4500W
EN 29