Open Window Detection, Energy Savings - vogelundnoot BLOWER 950W Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

- From Auto, Comfort, Eco or Frost protection mode, press
seconds. Press
twice, the programme for each day of the week
(Comfort, Eco, P1, P2 or P3) will scroll on display in front of you.
- To exit the programme viewing mode, press
This function allows you to change the setting temperature tempora-
rily until the next scheduled change in temperature or the transition to
0:00.
The device is in Auto mode, the running programme is Eco 15,5°C.
3
3
The cursor corresponding to the operating mode, i.e Eco mode in
our example, is blinking during the duration of the temporary deroga-
tion.
3
OPEN WINDOW DETECTION, ENERGY
SAVINGS
the open window detection is sensitive to temperature va-
riations. The device will react to the window openings in accordance
with diff erent parameters: temperature setting, rise and fall of tempe-
rature in the room, outside temperature, location of the device...
If the device is located close to a front door, the detection may be dis-
turbed by the air caused by opening door. If this is a problem, we recom-
mend that you disable the automatic mode open window detection
page
17). You can, however, use the manual activation (see below).
for 5
twice.
Lowering temperature cycle by setting frost protection during venti-
lation of a room by opened window. You can access the open window
detection from the Comfort, Eco and Auto modes. Two ways to enable
the detector:
the blower detects a temperature change.
sing a button.
To disable this mode,
The device detects a temperature fall. An opened window, a door to the
outside, can cause this temperature fall.
must cause a signi cant temperature fall to be perceptible by the device.
This temperature drop detection triggers the change to Frost Protection
mode.
Note:
(see
2
the lowering temperature cycle starts as soon as
the cycle of lowering temperature starts by pres-
see page 16.
The diff erence between the air from the inside and the outside
M16MI328 A02_01/18
EN
1
= the favoured
location
= another location
9

Publicité

Table des Matières
loading

Table des Matières