Super Comfort - Activation/Deactivation; Comfort Setpoint Temperature Limit; Setting Of The Maximum Duration Of Authorised Boost; Setting Of The Maximum Ambient Temperature For The Automatic Stop Of The Boost - vogelundnoot BLOWER 950W Notice D'utilisation

SUPER COMFORT - ACTIVATION/
DEACTIVATION
By default, the Super comfort is enabled.
sCF yes
ashes, then appears on the display. The Boost symbol and
the heating indicator appear on the display.
Press or to enable or disable the Super comfort.
yes
= Super Comfort enabled.
NO
= Super Comfort disabled.
To save and move automatically to the next setting, press
exit the user settings, press

COMFORT SETPOINT TEMPERATURE LIMIT

You can limit the setting temperature range by introducing a maximum
and / or minimum setting, preventing unintentional changes in tem-
perature.
• Low temperature limit
Locking of the setting range using a minimum temperature stop, pre-
venting the temperature from being set below that temperature.
The minimum setting is preset to 7°C. You can adjust from 7°C to 15°C
by intervals of 1°C.
To change the minimum temperature setting, press
then save by pressing
If you do not want to change it, press
matically to set the maximum setting. To exit the user settings, press
twice.
• High temperature limit
Locking of the setting range using a maximum temperature increase,
preventing the temperature from being set above that
temperature.
The maximum setting is preset to 30°C. You can adjust from 19°C
to 30°C by intervals of 1°C.
M16MI328 A01_01/18
twice.
.
: the device changes auto-
To change the maximum temperature setting, press
To save and move automatically to the next setting, press
exit the user settings, press
SETTING OF THE MAXIMUM DURATION
OF AUTHORISED BOOST
The maximum duration of Boost is preset at 60 minutes. You can adjust
it from 30 to 90 minutes by intervals of 30 minutes.
- The Boost symbol and the heating indicator appear on the display
and the preset duration of 60 minutes ash.
. To
- Press or
- To save and move automatically to the next setting, press
or
To exit the user settings, press
SETTING OF THE MAXIMUM AMBIENT
TEMPERATURE FOR THE
AUTOMATIC STOP OF THE BOOST
When the Boost is enabled, the blower has to heat the room until the
temperature limit: the maximum ambient temperature.
When it is reached, the Boost stops automatically.
It is preset at 39°C, you can adjust it from 25°C to 39°C by intervals of
1°C.
twice.
to display the desired duration.
twice.
EN
or .
. To
.
14