Restoring Factory Settings - vogelundnoot BLOWER 950W Notice D'utilisation

If you have just activated the PIN code, follow the stages described be-
low.
On
To exit the Installer settings, press

RESTORING FACTORY SETTINGS

If the PIN code protection is disabled, the user and installer settings are
re-initialized:
From the PIN code setting, press
display.
M16MI328 A01_01/18
twice.
rest
. appears brie y on the
NO
ashes. Press or
yes
= Factory settings reset
NO
= Factory settings not reset
Press the key for 5 seconds. The device returns to its initial con -
guration and goes back automatically to the home display of the ins-
taller settings.
The following factory values will be eff ective:
To exit the user settings, press
EN
YES
to select .
19°C
60 min.
Disabled
L3
-3,5°C
7°C
Enabled
7°C
30°C
60 min.
39°C
°C
Enabled
Enabled
Opti comfort
Disabled
0000
twice.
18