Setting The Temperature Unit; Restoring Factory Settings - vogelundnoot BLOWER 950W Notice D'utilisation

The Boost symbol and the heating indicator appear on the display and
the maximum temperature ashes.
You can set the Boost maximum temperature by pressing
from 25°C to 39°C by intervals of 1°C.
To save and move automatically to the next setting, press
exit the user settings, press

SETTING THE TEMPERATURE UNIT

The pre-set temperature unit is degrees Celsius.
Press or to change the temperature unit.
To save and move automatically to the next setting, press
To exit the user settings, press

RESTORING FACTORY SETTINGS

In order to a coming back to factory settings, proceed in the following
order:
From the setting of the temperature unit, press
on the display.
NO
ashes. Press or
twice.
twice.
rest
. appears
YES
to select .
yes
= Factory settings reset
NO
= Factory settings not reset
or
Press the key
guration and goes back automatically to the home display of the user
settings.
. To
The following factory values will be eff ective:
.
Press to exit the user settings.
for 5 seconds. The device returns to its initial con -
19°C
60 min.
Disabled
L3
-3,5°C
7°C
Enabled
7°C
30°C
60 min.
39°C
°C
M16MI328 A02_01/18
EN
15