1
1
Version with occupancy detector: The device is delivered by default with
the self-learning mode enabled as described
suits your requirements, you have nothing more to do, the device, after
the initial 7 day learning period will follow the autoprogramme which
will continue to tailor itself to your occupancy cycles.
Other version: your device's default setting is non-stop Comfort for 7
days a week.
Auto-programming (See Automatic programming with sel ear-
ning process
page
10).
your device will operate in Comfort mode, 24 hours a day, as
regards each day selected.
You can set the Comfort mode temperature to the temperature
you require
(see the Setting the Comfort mode temperature section
page
5).
The device will operate 24 hours a day in Eco mode.
You can set the temperature-lowering parameters
your device will operate in Comfort mode from 06:00 to 22:00 (and
in Eco mode from 22:00 to 06:00).
your device will operate in Comfort mode from 06:00 to 09:00 and
from 16:00 to 22:00 (and in Eco mode from 09:00 to 16:00 and from
22:00 to 06:00).
your device will operate in Comfort mode from 06:00 to 08:00, from
12:00 to 14:00 and from 18:00 to 23:00 (and in Eco mode from 23:00
to 06:00, from 08:00 to 12:00 and from 14:00 to 18:00).
If the default time schedules for the P1, P2 and P3 programmes does not
suit your routines, you can change them.
on page
6. If this programme
(see page
14).
1
1
3-
1
4
5
EN
prog
M16MI328 A02_01/18
7